PORTFOLIO

Award Winning MIT.nano encompassed more than 100,000 square feet of cleanroom and other advanced research spaces. These spaces were prepared for the campus research community and opened to faculty, students, and researchers from any school, or department at MIT.

AM completed infrastructure renovation designs for the 2000 SF nanotechnology cleanroom, HPM corridor and storage areas.

The Emerging Technology and Innovation Center completed in 2012 houses Class 100, Class 1000 and Class 10,000 cleanroom spaces, wet lab and engineering lab space, and a plastics processing high bay.

Opened in 2008, the Solid State Electronics Lab Expansion included three levels: a subfab, cleanroom, and fan deck.

Sitting next to Lindley Hall, the multidisciplinary facility brought together faculty, students and researchers from geology and engineering doing energy and environment research.

The Williams Eckhardt Research Center was completed in 2016 and houses a nanotechnology cleanroom, imaging suites and biotech laboratories for researchers.

AM provided on site support for Wet/Dry Etch, Thin Films, and Materials and Supplies to support the wafer size conversion.

AM provided programming and design, including tool list development, layout, utility matrix, process consulting for move of compound semiconductor operations to new MESA facility.

AM was retained to perform a Peer Review of the approximately 6,000 gross square foot Microscopy and Imaging Center, being designed by Smith Carter/WSP.

Completed in 2007, the Class 100/1000 cleanroom for nanotechnology and biotechnology included EBeam Lithography, MBE, Characterization, and Imaging areas.

Completed in 2006, the Class 100/1000 cleanroom for nanotechnology included EBeam Lithography, FIB and SEM Imaging areas. AM provided full design services, construction administration, utility matrix development, phasing, tool research, gas/chemical and HPM analysis, EMI, and acoustics consulting.

The KAUST project featured a 14,500 square foot cleanroom envelope with Clean Class 100 and 1000 areas for advanced fabrication of MEMS, Nano, Bio and Microtechnology devices and related research activities. LEED Certified Project

Quality Assurance Technicians performed an electrical inspection within a semiconductor FAB.

The AMQS Project Team inspected all of the Life Safety Systems for a semiconductor facility during the construction phase to ensure they met specifications.

The AMQS Project Team went through an extensive electrical inspection for a new semiconductor facility in the Midwestern United States.

During the construction process of a new ISO 5 Pharmaceutical Cleanroom, the AMQS Project Team tested and inspected the mechanical systems to include the chilled water system.

The AMQS Project Team delivered a TQM program for BQA inspections that included material inspections, weld visual and bore scope inspection and pressure and passivation inspections that included a full turnover package.

The AMQS Project Team completed implementation of a TQM Program for the recently completed University Cleanroom in the Northeastern United States that included mechanical, electrical, process piping and architectural inspections.

AMQS was hired to perform material inspection, documentation, video borescope weld inspection, routing verification, slope verification, and create the final turnover documentation package for validation and to meet FDA standards.

AMQS performed two rounds of video weld inspections and documentation for a leading manufacturer of advanced fibers and composites.

AMQS completed weld inspection projects for a global pharmaceutical manufacturer of Crestor, Nexium, Prilosec, Symbicort, as well as other globally recognized brands.

AMQS developed a thorough, client-specific program around the facility’s Life Safety Systems.

AMQS signed a multi-year agreement for the creation of a comprehensive quality program solution for a large-scale Texas based manufacturing company in the semiconductor industry.

AMQS completed a quality assurance/quality control testing and certification program for a global medical device manufacturer in the healthcare industry.

AMCBP Team completed a highly sensitive cleanroom relocation project for a Texas based semiconductor company.

AMCBP completed a cleanroom certification project for a major Midwest Big Ten University.

AM Cleanroom Build and Performance completed a 265,000 square foot cleanroom construction project for a global semiconductor facility in Southwestern United States.

AMCBP performed a variety of operational acceptance tests, created process flow drawings, and provided enhancement opportunities for a major university's cleanrooms and various systems.

AMCBP performed a facility audit, took a series of environmental measurements, and then provided a list of recommended changes to ensure a high quality product for a sporting goods manufacturer.

AMCBP provided protocol training, particulate monitoring training, cleanroom modifications, and final certification adhering to ISO5 and ISO7 standards for a global chemical manufacturing company.

AM Cleanroom Build and Performance completed a 10,000 square foot Cleanroom expansion to an ISO 5 space at a fabrication plant in Texas.

The AM Cleanroom Build and Performance Division completed the renovation of an existing space into a 43,000 square foot data center.

AMCRB provided a Full Turn-Key solution for a new cleanroom building consisting of 10,000 sq. ft. of ISO 5, 6, and 7 space in North America.

AMCRB completed an ISO 7 Pharma Cleanroom Install for a specialty pharma company in North America.

AMCRB completed an ISO 5 Cleanroom Expansion for a optical communication component company in North America.

AMCRB completed an ISO 7 Cleanroom Installation for a pharmaceutical compounding company in North America.

AMCRB completed an ISO 5 Cleanroom Expansion for a semiconductor plant in North America.

AMCRB completed an ISO 7 Cleanroom Installation for a medical production company in North America.

AM Technical Solutions (AMTS) provided Full Turn-Key extraction scope ownership for a semiconductor plant in North America. The process included decommission, decontamination, removal for resale and overseas crafting of over 400 tools and peripheral support equipment.

AM Technical Solutions (AMTS) provided Full Turn-Key extraction scope ownership for a semiconductor plant in North America. AMTS was fully integrated with the owner team and mentored and managed all mechanical, electrical, and architectural trades contractors and programmed, planned and executed the master project schedule.

AM Technical Solutions (AMTS) helped convert a 130nm facility to a 90nm facility by listening to their existing issues and providing recommendations for improvements to their program. Their EPCM solution progressed according to plan, and in some cases has surpassed expectations.

AM Technical Solutions (AMTS) delivered a high value turnkey solution that leveraged our internal capabilities along with the complementary capabilities of our strategic partners to help a large semiconductor facility in the United States grow.

AMTS provided a construction management solution for Brazil’s first semiconductor manufacturing facility.  This state of the art facility consisted of a class 1,000 cleanroom, office building and supporting process gas, chemical equipment and UPW plant. Program included ownership of base build completion through system acceptance, handover, and commissioning, engineering, procurement and construction management services.

AMTS provided construction management for Global leader in the Semiconductor Foundry Industry, manufacturing complex state of the art technologies across multiple continents.  AMTS is a signature partner to the owner in the design, procurement, cost control, and construction management of 1000’s of tool installations.  Additionally AMTS provided consultation support on the base build construction of new facilities.

AMTS provided project management for one of the world’s largest solar energy businesses. AM Technical Solutions provided project management program that included a full quality program around construction or the facility and MEP upgrades.

AMTS provided Malaysia’s first solar manufacturing facility with construction management solutions. This world-class facility consisted of a manufacturing facility , an office building, Central Utilities Building (CUB),  Process Utilities Building (PUB), Site Electrical Substation (SS) and yard support equipment including storage tanks and cooling towers. We provided engineering, procurement and construction for base build upgrades and tool hookup as well as equipment installation / startup and equipment operation / maintenance.

AMTS programs included quality support, construction management support, base build and tool install for both new construction and facility re-tooling at large global manufacturing site. The project management support has been ongoing for almost a decade.

AMTS provided facility solutions program for North American Semiconductor Manufacturer which included several programs around quality support for facility expansion, new tool arrival and retooling. Also support in equipment transfer of technology from one facility to another.

AMTS provided project management for a complete facility shutdown of its manufacturing facilities . The project management scope required decommission, decontamination and removal of over 500 tools, as well as decontamination and building closure skills.

AMTS provided facility solutions for global aerospace manufacturing facility. The program we provided included field service engineering, equipment service maintenance, as well as, modifications, repairs, and troubleshooting for their equipment.

AMTS provided facility solutions for aerospace manufacturer which included integration into owner construction team, mentored and managed all contractors on site, programmed, planned, and executed master project, and owned all process technology areas throughout three operating factories.

AMTS provided project management for a large 300mm facility while expanding an existing 200mm facility. The program included a comprehensive management program around the procurement, cost, schedule and quality of construction.

AMTS provided project management solutions for Pharmaceutical Manufacturing Facility. The programs included management around new construction of the cGMP facilities and included material inspection, adherence to code compliance, and ensuring facility was being built to specification of design.

AMTS provided project management for global defense manufacturing company. We managed all phases of facility construction and equipment move in and removal. In addition we provided programs around management of the controlled environment space where manufacturing is taking place in highly secure areas.

AMTS provided project management around the construction and fit out of two 100,000 Ft² manufacturing facilities. The program included design engineering of production space, integrated construction management of base build and tool hook-up, site utilities interface, tool decommissioning & installations as well as procurement support.

AMTS supported global high-tech manufacturer for the last eight years with facility solutions. AMTS programs included quality support, construction management support, base build and tool install for both new construction and facility re-tooling.

AMTS performed facility solutions for global semiconductor manufacturer which include tool moves, hook-up management, and cleanroom project management around new tool installations.

AMTS managed multi-billion dollar construction projects from base build to tool install. We worked with the owner and ensured their project was constructed using lean methodology and at the best overall value.